Scrubber Rental

Particulate Scrubber Rental, Model MVS-2.2

Our Multi-Vane Venturi Scrubber (MVS) rental is a highly efficient liquid-to-gas contactor used to clean gases contaminated with particulates before they are exhausted into the atmosphere. The gas enters the MVS at a tangent and establishes a cyclonic pattern around a centrally located bundle of vanes. Scrubbing liquid is recirculated from the integral sump to the Venturi vane bundle, where a cloud of liquid droplets forms. These droplets contact the incoming gas stream and entrain the particulates. The droplets and particulates are then removed from the gas stream by cyclonic action and collected into the sump.

 

The rental scrubber is a skid mounted and fully automated system that is easily transported and can be used for pilot testing, as a temporary solution for emergency situations, or for projects involving a diminished flow rate.

Rental Scrubber Specifications

Removal Efficiency

96+% removal ≥1 micron particulate

Scrubber and Sump Construction

304 SS

Air Flow Capacity

2200 SCFM

Stack Height

 ~13 ft.

Stack Diameter

10″

Make-Up Water Connection

 ½ ” NPT

Overflow Connection

 1 ½” NPT

Blow-down Liquid Connection

 1″ NPT

Electrical Requirements

 3ph / 460V / 60Hz, 32 FLA

20 hp fan motor w/ VFD

½ hp recirculation pump motor

Download our Rental Scrubber Spec Sheet.